• <form id="v8128"><legend id="v8128"></legend></form>

      1. <wbr id="v8128"><legend id="v8128"></legend></wbr>


      2. 24 hour customer service hotline

        023-65802068
        Notice Bulletin:
        Your position: Home > Product series

        7A04Aluminum plate

        Product consultation

        Sales phone:

        023-65802068

        Product introduction

        The 7A04 aluminum alloy plate has the characteristics of high strength, heat resistance and corrosion resistance. In the state of annealing and new quenching, the plasticity is similar to that of 2A12 alloy. It is used in the aircraft structure under the state of T6. The strength is high, the plasticity is low, the stress concentration is sensitive, the spot welding performance and the cutting performance are good, and the gas welding performance is poor. The 7075 aluminum alloy Aeronautics and Astronautics supplied by the aluminum and aluminum industry are all derived from the China aerospace aluminum material support base, which has formed a complete system of aerospace R & D and production. It has reached the standard of American aerospace standards through Boeing, Chinese commercial flight, peak racing and Airbus certification.

        Technical parameter

        典型合金

        7A04铝板

        材料状态

        T6、T651

        厚度(mm

        0.5-200

        宽度(mm

        1000-2500

        长度(mm

        2000-10000

        典型产品

        航天航空主要受力结构件:大梁、桁条、加强框、蒙皮、翼肋、起落架零件等


        2024铝板,2系军工用铝,2024铝合金价格,大型上市铝加工企业-河南明泰铝业股份有限公司.png


        The packing method of aluminum plate:

        1. Foil or laminating the aluminum sheet to ensure that the surface of the aluminum sheet is intact without scratching.

        2, the plastic or kraft paper package is used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during the transportation process (each package has moistureproof desiccant to ensure the quality of our products in East China and Southern China).

        3, add wooden support and steel belt reinforcement to avoid collision in transportation process and ensure aluminum plate geometry unchanged.

        4. Export products are packed in wooden boxes and brackets with fumigation marks.

        5, packaging according to other packaging requirements of customers.

        The packing method of the strip:

        1. When the width of the strip is not larger than 500mm and the coil diameter is not greater than 500mm, after wrapping 1~2 layers of kraft paper outside, it will be packed with adhesive label.

        2, when the width of the strip is not more than 500mm and the roll diameter is more than 500mm, the outer layer is wrapped with bamboo sheet, fiber board or cardboard after wrapping 1~2 layers of kraft paper and a layer of plastic cloth, and the vertical or horizontal tray is packaged in series, and the vertical (or lying) tray is used.

        3, when the width of the strip is greater than 500mm and the roll diameter is more than 500mm, the 1~2 layers of kraft paper and a layer of plastic cloth are wrapped, and the outer layer is packed with a bamboo mat, or the fiberboard is wrapped by a vertical or horizontal tray frame.


        Product application

        Aeronautical and aerospace high strength aluminum alloy is mainly used in aircraft fuselage parts, engine room, seat, control system, suitable for using thick plates, profiles, forgings, aerospace force structural parts: beam, truss, reinforced frame, skin, wing rib, joint, landing gear and so on.


        1524448443281686.png

        Hot-sale product

        Online ordering

        * Customer name:

        * Contact number:

        (Please add area code for fixing: xxx-xxxxxxxx; Phone: xxxxxxxxxxx)

        E-mail:      

        Requirement description:

        Contact us