• <form id="v8128"><legend id="v8128"></legend></form>

      1. <wbr id="v8128"><legend id="v8128"></legend></wbr>


      2. 24 hour customer service hotline

        023-65802068
        Notice Bulletin:
        Your position: Home > Product series

        6111Aluminum plate

        Product consultation

        Sales phone:

        023-65802068

        Product introduction

        6111 aluminum alloy cover material is one of the important products to promote the light weight, energy saving and emission reduction of automobile. The product has obvious weight reduction benefit, considerable energy saving effect, reducing air pollution and improving the environmental quality. It is helpful to improve the stability of vehicle driving, the comfort and safety of passengers.

        Technical parameter

        典型合金

        6111铝板

        材料状态

        T43、T61

        厚度(mm

        0.7-1.5

        宽度(mm

        800-2400

        长度(mm

        1000-5500

        典型产品

        汽车覆盖件、壁板等


        2024铝板,2系军工用铝,2024铝合金价格,大型上市铝加工企业-河南明泰铝业股份有限公司.png


        The packing method of aluminum plate:

        1. Foil or laminating the aluminum sheet to ensure that the surface of the aluminum sheet is intact without scratching.

        2, the plastic or kraft paper package is used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during the transportation process (each package has moistureproof desiccant to ensure the quality of our products in East China and Southern China).

        3, add wooden support and steel belt reinforcement to avoid collision in transportation process and ensure aluminum plate geometry unchanged.

        4. Export products are packed in wooden boxes and brackets with fumigation marks.

        5, packaging according to other packaging requirements of customers.

        The packing method of the strip:

        1. When the width of the strip is not larger than 500mm and the coil diameter is not greater than 500mm, after wrapping 1~2 layers of kraft paper outside, it will be packed with adhesive label.

        2, when the width of the strip is not more than 500mm and the roll diameter is more than 500mm, the outer layer is wrapped with bamboo sheet, fiber board or cardboard after wrapping 1~2 layers of kraft paper and a layer of plastic cloth, and the vertical or horizontal tray is packaged in series, and the vertical (or lying) tray is used.

        3, when the width of the strip is greater than 500mm and the roll diameter is more than 500mm, the 1~2 layers of kraft paper and a layer of plastic cloth are wrapped, and the outer layer is packed with a bamboo mat, or the fiberboard is wrapped by a vertical or horizontal tray frame.



        Product application

        Automobile body cover is the auto parts of aluminum alloy products covering the car body through deep blanking. The typical uses include the inside and outside plate of the engine cover, the inside and outside plate of the door, the inside and outside board of the trunk cover, the inside and outside board of the roof, the wing plate and so on.

        表.jpg


        Hot-sale product

        Online ordering

        * Customer name:

        * Contact number:

        (Please add area code for fixing: xxx-xxxxxxxx; Phone: xxxxxxxxxxx)

        E-mail:      

        Requirement description:

        Contact us